Cortelco C56P User Manual download pdf (Page 22)

Notice:

1）You need save the configuration and reboot the phone after set this page.

2）If you modify the port of Telnet and HTTP, you would better set the value more than 1024

because the port value less than 1024 is system port reserved.

3）if you set 0 for the HTTP port, it will disable HTTP service.

4.3.2.4. TIME&DATE

Setting time zone and SNTP (Simple Network Time Protocol) server according to your location, you can

also manually adjust date and time in this web page.

SNTP

Field name explanation

Enable SNTP Enable SNTP by selecting it

Enable DHCP Time Enable DHCP Time by selecting it, then the

phone will automatically synchronize the standard time.

Primary Server Set SNTP Primary Server IP address.

Secondary Server Set SNTP Secondary Server IP address

Timezone Select the Time zone according to your location.

Resync Period Set the Resync Period, the default is 60 seconds.

12 –Hour Clock Switch the time mechanism between 12 hours and 24 hours.

Default is 24 hours mode.

Enable Enable daylight saving time

Offset(minutes) Setup the variety length

Month Setup stat and end month

Week Setup start and end week

Day Setup start and end day

Hour Setup start and end hours

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 49 50

No comments

Cortelco C56P User Manual Page 22