Cortelco C56P User Manual download pdf (Page 19)

 PPPoE: In this mode, your must input your ADSL account and password.

You can also refer to 3.2.1 Network setting to speed setting your network.

If you use static mode, you need set it.

IP Address Input the IP address distributed to you.

Subnet Mask Input the Subnet Mask distributed to you.

IP Gateway Input the Gateway address distributed to you.

DNS Domain

Set DNS domain postfix. When the domain which you inputted can

not be parsed, phone will automatically add this domain to the end

of the domain which you inputted before and parse it again.

Primary DNS Input your primary DNS server address.

Secondary DNS Input your Secondary DNS server address.

If you uses PPPoE mode， you need to make the above setting.

Server Name It will be provided by ISP.

User Input your ADSL account.

Password Input your ADSL password.

Notice:

1）Click “Apply” button after finish your setting, IP Phone will save the setting automatically

and new setting will take effect.

2）If you modify IP address, the web will not response by the old IP address. Your need input

new IP address in the address column to logon in the phone.

4.3.2.2. Qos Config

The VOIP phone support 802.1Q/P protocol and DiffServ configuration. VLAN functionality can use

different VLAN IDs by setting signal/voice VLAN and data VLAN. The VLAN application of this phone is

very flexible.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 49 50

No comments

Cortelco C56P User Manual Page 19